RADIUS (Remote Authentication Dial In User Service) is a protocol that allows users who access the networks to perform authentication, authorization, and accounting.
Firstly, click “RADIUS Settings” under the “System Settings” menu.
Click the Add button on the RADIUS Profiles tab.
Once you have entered the required records, click on the “Save” button.
After, click on the NAS Definitions tab. Click Add button to enter the required settings.
After making the required settings, click the “Save” button and “Apply Changes.”
Click “Verification Rules” under the “Authentication Rules” menu.
The generated switch that was created with the “Add” button in the radius profiles tab is selected after pressing the “Add” button in this tab.
For the Providers field, Local Groups is selected.
For radius the group to be verify is selected and used.
A local user is created in the PPTP VPN group from the Authentication Rules menu.
Then the user name and password created from the Authentication Screen will be entered.
On the switch side, the Radius setting should be as follows.
radius-server host 10.2.1.205 auth-port 1812 acct-port 1813 key Radius
radius-server source-ports 1645-1646
Entries will be provided after necessary adjustments are made on both sides.
ePati Cyber Security Co.
Mersin Üniversitesi Çiftlikköy Kampüsü
Teknopark İdari Binası Kat:4 No: 411
Posta Kodu: 33343
Yenişehir / Mersin / TURKEY
Web: www.epati.com.tr
e-Mail: info@epati.com.tr
Tel: +90 324 361 02 33
Fax: +90 324 361 02 39