Nat by Destination

This is used to enable that all IP addresses from local network exits over a single real IP to target destination. It is possible to forward all ports, or a single port only.

Network Topology

Configuration

Firstly, click Nat by Destination under the NAT Configuration menu.

In Nat by Destination page, new register can be created or can arranged. For this click “add” button.

FIELD	DESCRIPTION
`Status`	Choose either active or passive as status.
`Ethernet Interface`	Choose Ethernet interface from which NAT is to be performed.
`Source Address`	Enter which addresses will be included in the NAT process when NAT is performed.
`Target Address`	Enter to what address the NAT will be performed.
`Target Port`	Enter target port.
`NAT Address`	Enter real IPv4 address to be used for NAT.
`Description`	Enter description.

Back PDF