Port Forwarding

It is the process of routing the ports required to connect to the local network servers over the Internet to the corresponding IP addresses.

Firstly, click Port Forwarding under the NAT Configuration menu.

In Port Forwarding page, new register can be created or can arranged. For this click “add” button.

FIELD	DESCRIPTION
`Status`	Choose either active or passive as status.
`Protocol`	Choose protocol to be routed.
`Description`	Enter description.
`Local IP Address`	Enter IP address for which port address is to be performed.
`Local Port`	Enter port number to be routed.
`WAN Address`	Enter WAN IPv4 address to which routing is performed.
`WAN Portu`	Enter port number to which routing is performed.
`Networked to be Accessed`	Choose network to which routing is performed.
`Maximum Number of Connections per Person`	Enter maximum number of connections to port to which routing is performed per person.
`Maximum Number of Connections in 5 Seconds`	Enter maximum number of connections to port to which routing is performed in 5 seconds