Static NAT

This is used to match a real IP address with any client. The client IP address to be paired must be a private IP address.

Network Topology

Configuration

Firstly, click Static NAT under the NAT Configuration menu.

If a virtual IP address within the organization is to be matched with a real IP address from the outside, a static NAT operation is to be performed. This makes the private IP address the real IP address.
In the event of users with ADSL Internet connection this action cannot be performed, as ADSL has only one real IP address, which is the output IP of Antikor (This requires additional IP address to be provided by ISS). In the event of an Internet output with multiple IP addresses, such as Frame Relay / Metro Ethernet and if there are more than one real IP address any private IP address may be matched with real IP address.

In Static NAT page, new register can be created or can arranged. For this click “add” button.

FIELD	DESCRIPTION
Status	Choose either active or passive as status.
Address Family	Choose address family.
Locall IP Address	Either IPv4 or IPv6 address defined in Client Definitions.
External IP Address	Enter real IPv4 address. It must be defined in IP Pools.
Description	Enter description.

If ports are added to accesses, all ports on this server will be open for access.

All ports open for access;

To open access to specific ports, before “access” button and later “add” button click.