NAT By Destination

This is used to enable that all IP addresses from local network exits over a single real IP to target destination. NAT can be written according to the destination using all services, as well as written on the basis of a single service.


NAT By Destination New Record


Status Choose either active or passive as status.
Log Traffic By activating the button, NAT by destination traffic can be sent to the Syslog server.
Ethernet Interface Choose Ethernet interface from which NAT is to be performed.
Source IP Enter which addresses will be included in the NAT process when NAT is performed.
Destination IP Enter to what address the NAT
Services When performing a NAT operation, it is selected which service to perform a NAT operation using.
NAT Address Enter real IPv4 address to be used for NAT.
Description Enter description.

ePati Cyber Security Co.

Mersin Üniversitesi Çiftlikköy Kampüsü
Teknopark İdari Binası Kat:4 No: 411
Posta Kodu: 33343
Yenişehir / Mersin / TURKEY

Tel: +90 324 361 02 33
Fax: +90 324 361 02 39