VLAN Configuration

This is the section where the VLAN definitions are made in AntiKor. The VLAN settings on the switches are configured in AntiKor in this section. Which VLAN address tag is to be assigned to which IP address group and which IP address is assigned to NAT is defined in a single line.

VLAN Configuration New Record

General Statuses

FIELD	DESCRIPTION
`Status`	Choose either active or passive as status.
`Name`	Enter VLAN name.
`VLAN ID`	Choose VLAN number.
`Connection Type`	Choose either Tagged, Routed or Tagged & PBR (Only ARP). If routed is selected, automatic registration can be entered for Static Routing with the IP address entered in the router field. If tagged & pbr is selected automatic registration can be entered for PBR with the IP address entered in the router field.
`Security Zone`	The security zone is selected for the VLAN interface.
`Ethernet Interface`	Choose which interface to be used.

IPv4 Settings

FIELD	DESCRIPTION
`IPv4 Address`	Enter IPv4 address to be used by VLAN in Antikor.
`DHCPv4 Beginning`	Enter beginning IPv4 address of IPv4 addresses to be distributed in VLAN.
`DHCPv4 End`	Enter end IPv4 address of IPv4 addresses to be distributed in VLAN.
`DHCPv4 Gateway`	Enter IPv4 gateway for VLAN.
`Global NAT`	Enter real IPv4 address of VLAN which can access to Internet.
`Global NAT Log Traffic`	By activating the button, all traffic can be sent to the Syslog server.

IPv6 Settings

FIELD	DESCRIPTION
`EUI64`	If activated, the Extended Unique Identifier places 16 bits in the middle of this 48-bit address to create a 64-bit interface ID using the client’s 48-bit Ethernet MAC address.
`IPv6 Address`	Enter IPv6 address to be used by VLAN in Antikor.
`DHCPv6 Beginning`	Enter beginning IPv6 address of IPv6 addresses to be distributed in VLAN.
`DHCPv6 End`	Enter end IPv6 address of IPv6 addresses to be distributed in VLAN.

Options

FIELD	DESCRIPTION
`MAC Matching`	Choose whether or not IP addresses are to be matched with MAC Addresses.
`NAT`	Choose whether or not NAT is to be used for VLAN.
`Retrieve Record`	Choose retrieve a record option if the system is desired to be active.
`Make an Announcement`	If an announcement is made (BGP is used) for the added IP address is selected.
`DHCPv4 Server`	Choose whether or not DHCPv4 is to be used or not.
`DHCPv6 Server`	Choose whether or not DHCPv6 is to be used or not.
`DHCPv4 Relay`	Forward incoming dhcp messages to a specific dhcpv4 server
`DHCPv6 Relay`	forward incoming dhcp messages to a specific dhcpv6 server

Back PDF