Site To Site VPN Settings

It is possible to create a tunnel between two specific remote sites networks (with the condition of existance of a Static IP). Multiple networks can be combined.

Also, as an important point, the local IP classes are not in the same subnets.

Site to Site VPN Settings New Record

Site_to_Site_Conf

FIELD	DESCRIPTION
`Status`	Choose either active or passive as status.
`Protocol`	Chooseeither GIF or GRE protocol types.
`Connection name`	Enter connection name.
`Source IP Address`	Enter source IP address.
`Counter IP Address`	Enter counter IP address.
`Source Serial IP Address`	Enter source serial IP address.
`Counter Serial IP Address`	Enter counter serial IP address.
`Target Network`	Enter target network address.

Back PDF